The SMART6 Multi-loop is a powerful and sophisticated
Analogue Addressable Fire Alarm Control Panel that
offers a variety of modular components which allow it to
meet a wide variety of applications.
The graphical touch screen provides a clear,
uncluttered and intuitive interface which results in the
end user requiring minimal training.
The control panel has the capability to support complex
cause and effect programming and a wide range of
user controllable functions that make the panel suitable
for a vast range of projects from multi-site commercial
developments through to industrial applications.
It can operate as part of a networked system of up to
64 panel’s peer-to-peer, or a standalone panel. It has
powerful programming options that allow configurable
control over whether messages from specific panels
are transmitted around the network or remain local.
Each system component has been specifically
designed to operate as part of a Smart Multi-loop EN54
listed system providing assurance that the detectors,
interfaces, sounders, and panel are all fully compatible
with each other and that the full range of system
functionality is supported by all devices.

Features
Modular construction allows a panel to be specified
using just the required modules.
Up to 4 loop card modules.
4.3” colour touch screen display.
Capacity for up to 6 intelligent modules.
Full system redundancy.
Connection to TCP/IP Module.
Extensive Day/Night mode programming.
Full cause and effect programming via front panel or
the Smart configurator PC software.
8032 event log entries.
using multiple zone monitor modules, the panel can be
configured into a fully functioning conventional panel.
250 fyreye MKII devices per loop.
254 addresssable programmable zones.
Up to 64 panel peer-to-peer network.
Positive Alarm Sequence.
Alarm Verification
Day/night (Building occupied/unoccupied)
programming.
Alarm circuit special application 24V mode.
15A Power Supply.

Technical Specification
Code
Description Intelligent Addressable Control Panel
Standard EN54-2 & EN54-4
Main Primary Supply
Mains AC Supply Voltage 120/240 VAC
Mains AC Supply Frequency 50/60 Hz
Power Supply DC Rating 30VDC 400W 15A
Battery Secondary Supply
Battery Voltage 24VDC
Battery Charge Current 1.1A (max)
Battery Capacity 2 x 12Ah, 12VDC sealed lead acid (max)
Alarm Circuits (SCM-ACM)
Output Voltage 24VDC Nominal
Maximum Alarm Circuit Current 2 x 500mA (max)
Maxiumum Line Impendance 3.6Ω (1.8Ω per core)
Wiring Class Class B [Power limited & Supervised]
Special Applications Auxiliary 24VDC Output [Power limited & Unsupervised]
Detection Loop (SCM-LCM)
Circuit Voltage 28V + 9V Data (Nominal)
Maximum Loop Current 450mA
Maximum Loop Capacity 250 Addresses
Maximum Loop Resistance 25Ω per core @ 200mA / 10Ω per core @ 450mA
Maximum Loop Capacitance 500nF
Termination Board Relay Outputs
Alarm (C,NO,NC)
Contact rating: 125VAC @ 0.5A / 30VDC @ 1A
Fault Normally Energised (C,NO,NC)
Contact rating: 125VAC @ 0.5A / 30VDC @ 1A
Network
Maximum Network Size 64 Nodes
Maximum Distance Between
Nodes 1KM
Software
Maximum Software Zones 254 Zones
Maximum Event Log 8032 Events
Software Programming Touchscreen LCD or Smart Configurator PC software
Display
LCD 4.3” Resistive touch screen. 480 x 272 pixel resolution
LED Indicators
1 Red (1 x Alarm), 1 Green (Power), 10 Yellow (1 x Sounder Active, 1 x Sounder
Fault, 1 x Fault, 1 x Relay Delay, 1 x Controls Active, 1 x General Disablement, 1
x General Test, 1 x Sounder Disablement, 1 x Sounder Delay, 1 x System Fault).
Button Controls Stop Sounders, Silence Buzzer, Scroll Display, Reset, Start Sounders
2
HARD & SOFT ADDRESSABLE FIRE ALARM SYSTEMS
GLT-261-6-10 Issue No. 001 Date: 25/03/2020
Smart Connect MultiLoop (SMART6/32)
Technical Specification
Enclosure
Dimensions H x W x D (mm) 535mm x 385mm x 150mm
Weight 9KG
Cable Entries 34
Max Module Capacity 6
Environmental
Operating Temperature -5°C (23°F) to 40°C (104°F)
Relative Humidity 93% Non-Condensing
Module List
Description Code
Loop Card Module SCM-LCM
Alarm Circuit Module SCM-ACM
Multi Relay Module SCM-RM
RS485 Network Module SCM-NM
Multi Input Module SCM-MIM
Zone Monitor Module SCM-ZMM
*RS232 Printer Module SCM-PM
Ethernet TCP/IP Module SCM-LAN
*Only available on SMART10/P & SMART26/P Versions
Product Codes
Description Code
SMART6 Multi-loop Addressable
Control Panel SMART6
SMART6 Multi-loop Addressable
Control Panel w/ 32 Zone LED SMART6/32
Panel Interior View
Dimensions B

Benefits
Troubleshooting and programming time minimised
by utilising a range of features such as loop auto
search, walk test, detailed system menu’s etc.
Full system redundancy.
Menu driven graphical touch screen user interface
for ease of operation.
Supports a comprehensive range of DIN mounted
panel modules and devices for greater flexibility in
design.
Available in a variety of different panel enclosure
sizes to better suit a sites requirements.
Touch screen full functioning repeater available
(SMART/REP).