Gent XENS-850 Flush Manual Call Point 470 Ohms Glass

Gent XENS-850 Flush Manual Call Point 470 Ohms Glass

Gent conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.

Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.

With the addition of a hinged transparent cover the element may be protected against accidental operation.

A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.

Description

Gent XENS-850 Flush Manual Call Point 470 Ohms Glass

Gent conventional manual call points are designed to provide a manual alarm interface to conventional fire alarm control panels. All call points are supplied in the standard red colour and are available in semi-flush mounting or surface mounting options. The manual call points are all with a 470 Ohm resistor and Normally Open contact, complete with glass.

Both break glass, and resettable operating elements can be used in the standard unit by a yellow strip on the element which becomes visible when activated.

With the addition of a hinged transparent cover the element may be protected against accidental operation.

A specialist test key may be inserted into the bottom of the unit to lower the glass and release the micro-switch and thus a full functional test is achieved.

Key Features

  • Fully compliant with EN54, Part 11
  • Re-settable operating element option
  • 470 Ohm resistor and Normally Open contact complete with glass
  • Resistive and clean contact connections
  • Technical Data
    Current Rating 2A (switching only)
    Dimensions Height 93mm – Width 89
    Humidity 93+ 3% non-condensing
    Ingress Protection IP24D
    Operating Temperature -10°C to +55°C
    Operating Voltage 30VDC maximum
    Weight 180g (130g Semi- flush)

    Book a Service Call

      Enquire Now